We carry the hub you are looking for with our part number 8-219-13UC3 and then for brake assemblies # 23-464 for the left hand side and # 23-465 for the right hand side. view full answer...
We have what you need to get a bike rack on the back of your 2019 Keystone Alpine, but there is no rack that is 5th wheel approved and is a 1-1/4". You can get another hitch or something like this # 3371804060 so you can use a 2" bike rack. These are the only size shanks that are approved to work with 5th wheels like yours.
Then you can get this RV Rider # HLY64FR bike rack. This is approved to work with your 5th wheel and has a capacity of 80 lbs per bike so it's fully capable of carrying... view full answer...
Best option we'd have would be a multi-fit hitch like the part # 13703 which is designed for frames that are between 22 and 72 inches in width measured from outside to outside and fits all of the standard trailer frame designs. view full answer...
For the Keystone Montanas Lippert does make specific landing gear legs for those trailers, but if all of the dimensions are compatible for the # LC333964 then there's no reason in your situation you couldn't use the set. Here are the full specs:
Total lift: 37"
Travel: 21"
Drop leg: 16"
Outer tube length: 29-1/2"
Distance between weld-stops: 17-1/2"
Cross shaft length: 41" - 71"
Handle dimensions: 29-11/16" long x 10-3/16" wide
Footplate dimensions: 5" long x 7-15/16" wide
Combined weight... view full answer...
I highly recommend going with an Adco All-Climate + Wind cover. These have a Tyvek top cover which is the same material used to protect buildings that are under construction.
From the specs I could find on your 5th wheel trailer it looked like it was 40' long. For this you want the part # 290-34857 which fits fifth-wheels 37'1" - 40' long.
To ensure proper fit you simply need to measure your 5th wheel trailer from the front to the back (including bumpers, spare tire, and ladder - but... view full answer...
The towing capacity of your 2009 Ford F-250 will remain unchanged through the life of the vehicle in the eyes of the manufacturer no matter what components are added. The suspension enhancements that you are referring to will certainly help with your vehicle's ability to support the added weight but again will not increase it.
Please note that when using a set of airbags on a truck that is also pulling a 5th wheel trailer you need to be aware of where the brackets mount for each. If you... view full answer...
The Swagman e-spec bike rack you'd looked at, part # S94FR would be an outstanding choice for carrying 2 e-bikes weighing up to 70 lbs. You can lighten your bikes by 10 or so lbs each by removing the battery packs. The rack can accommodate bikes with tires up to 3 inches in width.
Before using the rack on the back of your fifth wheel, you'll want to defeat the folding feature by removing the folding pin and installing the supplied bolt, washers, and nut.
You will need to use an adapter... view full answer...
The only replacement option we offer for the Electric RV Fireplace BLT-999A-2/N is the Greystone 26" Electric Fireplace part # 324-000068 which has crystals, not logs. In order to be sure it fits your cutout withou a gap you'll need to measure. The cutout must be at least 26-1/4" wide x 20-1/2" tall but no more than 28-3/8" wide x 21-3/8" tall. view full answer...
Yes, you can up to three additional cameras to the Furrion RV Observation Camera System part # FOS05TASF. For the side of your trailer, I recommend using the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL which is also a built in marker light. If you wanted to add a camera to the vehicle as well then you can do so with the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF. view full answer...
We have some sink covers that could work for you. Cover # CAM43437, # CAM43436, and # CAM43431 are 13 by 15 inches and have adjustable feet on the bottoms for the best fit. We do not have a cover with the exact dimensions of your sink though. view full answer...
It sounds like you are looking for the manual override nut part # LC55FR which is what the manual override crank of your stabilizer attaches to when manually raising or lowering. view full answer...
The factory brake controller of your 2018 Ford F-350 is compatible with electric over hydraulic actuators so it will be fine.
Now to convert the trailer from electric drum to disc will require the HydraStar kit part # HBA16-252-82 which comes with the brake lines and breakaway kit. view full answer...
We have the Curt adjustable trailer hitch part # C13704 which can fit frame widths between 22 and 72 inches as well as has a 350 lb tongue weight capacity. As long as your trailer has box frame, C-channel frame, or I-beam frame this will fit and work well. view full answer...
If you have the Kodiak disc brake rotor/hub part # KHR1389D that you referenced the bearings you need are part # 25580 and # 02475 and then the grease seal is the part # RG06-070. If your trailer has 7k axles installed on it these part numbers would be what you'd need. view full answer...
Keystone Montanas use a unique landing gear set, but an Alpine would use a standard dimension landing gear set like what the Landing Gear Set part # RVLG-8000 is designed to fit. This would be a great set to replace what you have or for just the follow leg you'd want the part # LC179014. view full answer...
The Provider ST235/85R16 Radial Tire w 16" Viking Aluminum Wheel # A16RG8BMMFL that you referenced comes with center caps like what you see in the product pictures, but lug nuts would need to be ordered separately if needed. If you need 1/2 inch diameter lug nuts you'd need the part # 12CLN or if you need 9/16 inch diameter lugs part # LHLR110. view full answer...
I spoke with a representative of Demco who confirmed for me that you will need to use Demco Hijacker Autoslide Capture Plates # DM6171 along with the Demco Hijacker # DM8550024 fifth wheel hitch if you have a Trailair Flex Air such as # LC328492. view full answer...
We have just what you need. The SolidStep Manual Fold-Down Steps # LC678027 that you referenced are a 4 step version of the SolidStep designed to fit up to 30 inch wide doorways like you have. view full answer...
I do have some options for you but I think we need to double check your axle capacity. I looked up the 2008 Glendale Titanium Tour Series 5th Wheel Trailers and the heaviest one I could find (M-36E41TBR) was 12,562 lbs which would be very unlikely to have 8,000 lb axles. The majority of double eye leaf springs max out at 7,000 lbs as well.
Therefore, I recommend that you check the axle tube for the identification sticker. If you can send me a photo of this I would then be able to assist... view full answer...